Area Rug Pads
Premium rug pad to protect floors, prevent slipping, suppress noise, and extend the life of area rugs — reducing the risk of falls and injuries.
Rug Grabber™
Reversible area rug pad that holds rugs in place, reduces tripping hazards, and adds a comfortable, durable foundation underfoot while suppressing impact noise and echoes.
Recommended for: Guest Room · Public Space · Hospitality · Senior Living · Campus Housing · Corporate Office
Firm Grip™
Premium 5/16" rug pad for high-traffic areas or under heavy furniture. Keeps rugs in place, suppresses impact noise, and is reversible — for use on hard surfaces or carpeted floors.
Recommended for: Guest Room · Public Space · Hospitality · Senior Living · Campus Housing · Corporate Office
ADA Compliance for Area Rugs
In commercial and hospitality spaces, area rugs sit in accessible routes — so they have to meet ADA floor-surface standards. Here are the five requirements that matter most, and how the right pad helps you meet them.
The ½″ rule, visualized
Cross-section of an accessible-route rug assemblyThe rug, pad, and any backing must total no more than ½″. Anything over ¼″ needs exposed edges beveled at a 1:2 maximum slope so wheels and feet transition smoothly.
Maximum total thickness: ½"
The rug plus any backing and pad cannot exceed 1/2 inch (13 mm). Thick or high-pile rugs sink under wheels and hinder mobility.
Low-profile surface texture
Limited to tight, low-profile weaves — level loop, textured loop, level cut pile, or level cut/uncut pile. Shag and heavily textured rugs are non-compliant.
Secured edges
The entire perimeter must be fastened to the floor so the rug cannot shift, bunch, or buckle against wheeled traffic.
Beveled edges over ¼"
If total height (including pad) exceeds 1/4 inch, exposed edges must be beveled or sloped at a maximum ratio of 1:2.
Firm padding
Any cushion underneath must be firm. Loose or overly soft padding lets the surface deform, which is hazardous for walkers and wheelchairs.
How our pads help
Firm padding is the requirement that's most often overlooked — and both Rug Grabber™ (0.120") and Firm Grip™ (0.300") are firm, non-skid pads built for it. Pair either with a compliant low-pile rug to stay within the ½" total-thickness ceiling, secure the perimeter, and bevel any edge over ¼". For rolling-wheel areas, we recommend a double-glue installation to keep the assembly from shifting.
This is general guidance. ADA compliance depends on the complete assembly — the rug, the pad, edge treatment, and installation — not the pad alone. Confirm requirements against the current ADA Standards (U.S. Access Board) or consult a design professional for your project.
Not sure which rug pad fits your space?
Tell us about the area and traffic, and our team will spec the right one.